Ten Attentions to Keep Safe for Outdoor LED Display

In recent years, outdoor LED displays have become the darling of outdoor media advertising. For commercial customers, effective maintenance ensures long-term stable operation of the outdoor LED screen,thus avoiding interference with daily use due to equipment failure. The following are some of the details we should pay attention to when using.

1. Sequence for turning on and off

A: After turning on the control computer to make it run normally, turn on the outdoor LED display;

B: Firstly turn off the outdoor LED display, then turn off the computer.

2. It is found that the breakage or other damage should be replaced in time, special screws, pins, load-bearing beams, etc.

3. Regular inspection of products and steel structure solder joint surface anti-corrosion anti-rust paint is not off, if there is peeling or rust should be sprayed anti-corrosive paint or rust-proof paste.

4. The power supply should be stable and the grounding protection should be good. Do not use it under harsh natural conditions, especially strong lightning.Checking the reliability of the lightning rod and grounding system regularly.

5. In the rainy season, it is necessary to check whether there is water leakage.

6. Regularly checking the power supply lines and signal lines for cracking or biting.

7. Checking the product power distribution system every six months.

8. Outdoor LED displays exposed to outdoor environments for extended periods of time are prone to dust. It can be wiped with alcohol or dusted with a brush or vacuum cleaner, but it cannot be wiped directly with a damp cloth.

9. According to the LED display automatic preset mode, the single function such as start, stop, brightness adjustment, program list, etc. are tested one by one.

10. The outdoor LED display should have a rest for more than 2 hours per day, and used for and at least once a week during the rainy season. Turn on the screen at least once a month for more than 2 hours.